Mississippi Valley Associated Railroaders (Est. 1987)                                      2020 - 2021                                                         34 years
WHERE THE FUN BEGINS WITH N & HO SCALE TRAINS WITH OUR MEMBERS 
THE MODEL MODULAR RAILROAD CLUB

BUILDING A SINGLE - HO2GO MODULE

Next Page
Step 20: Our modules are set up in an oval. The front of the module is to the outside of the oval. Hence, the back rail is called the INNER               and the front rail is called the OUTER. The front track is wired to the front latches and the back track is wired to the back latches.               The inner rail (or back) is wired to the top. The outer rail (or front) is wired to the bottom latch.
Step 21: I then paint the rails and track with Rustoleum Painters touch. I use the spray can that says it also bonds to plastic. It works quite               well, but be carefulwith the foam. Too much and it will blister. I use flat brown.
Step 22: Clean the rail heads with isopropyl alcohol or a sharp chisel blade in the exacto knife or as is often the case, with both.